View TS9224IYPT_7289937.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

march 2010 doc id 15718 rev 2 1/14 14 ts9222, ts9224 high precision, high stability d ual and quad operational amplifiers features high precision: vio = 500 v max able to drive capacitive loads up to 500 pf rail-to-rail input and output low noise: 9 nv/ hz low distortion high output current: 80 ma high speed: 4 mhz, 1.3 v/ s operates from 2.7 v to 12 v esd internal protection: 2 kv latch-up immunity applications signal conditioning automotive applications headphone amplifiers sound cards, multimedia systems line and actuator drivers servo amplifiers description the ts9222 and ts9224 are rail-to-rail dual and quad operational amplifiers optimized for precision, noise and stab ility, which make them suitable for a wide range of automotive and industrial applications. these devices deliver a high output current that allows low-load impedances to be driven. they are stable for capacitive loads up to 500 pf. ts9222id-idt/ipt so8/tssop8 in2+ v cc- 1 2 3 5 4 8 7 6 in1+ in1- out2 + _ out1 in2- + _ v cc+ in2+ v cc- 1 2 3 5 4 8 7 6 in1+ in1- out2 + _ out1 in2- + _ v cc+ v cc- 1 2 3 11 4 14 13 12 in2+ in2- out4 out2 in4+ in4- 5 6 7 8 10 9 + _ + _ + _ out3 in3+ in3- + _ out1 in1+ in1- v cc+ v cc- 1 2 3 11 4 14 13 12 in2+ in2- out4 out2 in4+ in4- 5 6 7 8 10 9 + _ + _ + _ out3 in3+ in3- + _ out1 in1+ in1- v cc+ ts9224idt/ipt so14/tssop14 www.st.com
absolute maximum ratings and operating conditions ts9222, ts9224 2/14 doc id 15718 rev 2 1 absolute maximum ratings and operating conditions table 1. absolute maximum ratings (amr) symbol parameter value unit v cc supply voltage (1) 1. all voltage values, except differential volt age are with respect to network ground terminal. 14 v v id differential input voltage (2) 2. differential voltages are the non-inverting input terminal with respect to the inverting input terminal. if v id > 1 v, the maximum input current must not exceed 1 ma. in this case (v id > 1 v), an input series resistor must be added to limit input current. 1 v v in input voltage (3) 3. do not exceed 14 v. v cc- -0.3 to v cc+ +0.3 v t stg storage temperature -65 to +150 c r thja thermal resistance junction to ambient (4) so-8 tssop8 so-14 tssop14 4. short-circuits can caus e excessive heating. destructive dissipa tion can result from simultaneous short- circuits on all amplifiers. these values are typical. 125 120 66 100 c/w t j maximum junction temperature 150 c esd hbm: human body model (5) mm: machine model (6) cdm: charged device model (7) 5. human body model: a 100 pf capacit or is charged to the specified voltage, then discharged through a 1.5k resistor between two pins of the device. this is done for all couples of connected pin combinations while the other pins are floating. 6. machine model: a 200 pf capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ). this is done for all couples of connected pin combinations whil e the other pins are floating. 7. charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. th is is done for all pins. 2000 100 1500 v output short circuit duration see note (8) 8. there is no short-circ uit protection inside the device: s hort-circuits from the output to v cc can cause excessive heating. the maximum output current is approximately 80ma, independent of the magnitude of v cc . destructive dissipation can result from si multaneous short-circuits on all amplifiers. latch-up immunity 200 ma soldering temperature (10 sec), unleaded version 260 c table 2. operating conditions symbol parameter value unit v cc supply voltage 2.7 to 12 v v icm common mode input voltage range v cc- -0.2 to v cc+ +0.2 v t oper operating free air temperature range -40 to +125 c
ts9222, ts9224 electrical characteristics doc id 15718 rev 2 3/14 2 electrical characteristics table 3. electrical characteristics measured at v cc+ = +3 v, v cc- = 0 v, v icm = v cc /2, t amb = 25 c, and r l connected to v cc /2 (unless otherwise specified) symbol parameter test conditions min. typ. max. unit v io input offset voltage 500 v t min t amb t max 900 dv io input offset voltage drift 2 v/c i io input offset current v out = v cc /2, t min t amb t max 130 na i ib input bias current v out = v cc /2 t min t amb t max 15 55 90 na cmr common mode rejection ratio t min t amb t max 65 60 85 db svr supply voltage rejection ratio v cc = 2.7 to 3.3 v t min t amb t max 75 70 90 db a vd large signal voltage gain r l = 10 k , v out = 2 v p-p 70 200 v/mv r l = 600 , v out = 2 v p-p t min t amb t max 15 1.8 35 v oh high level output voltage r l = 10 k , t min t amb t max 2.90 v r l = 600 , t min t amb t max 2.87 v v ol low level output voltage r l = 10 k , t min t amb t max 50 mv r l = 600 , t min t amb t max 100 mv i o output short circuit current 50 80 ma i cc supply current (per operator) no load, vout = v cc /2 tmin tamb tmax 0.9 1.2 1.3 ma gbp gain bandwidth product r l = 10 k , c l = 100 pf 4 mhz sr slew rate r l = 10 k , c l = 100 pf 1.3 v/ s m phase margin at unit gain r l = 10 k , c l = 100 pf 60 degrees g m gain margin r l = 10 k , c l = 100 pf 8.5 db e n equivalent input noise voltage f = 1 khz 9 thd total harmonic distortion v out = 2 v p-p , f = 1 khz, a v = 1, r l =600 0.005 % c s channel separation 120 db nv hz ----------- -
electrical characteristics ts9222, ts9224 4/14 doc id 15718 rev 2 table 4. electrical characteristics measured at v cc+ = 5 v, v cc- = 0 v, v icm = v cc /2, t amb = 25 c, and r l connected to v cc /2 (unless otherwise specified) symbol parameter conditions min. typ. max. unit v io input offset voltage 500 v t min t amb t max 900 dv io input offset voltage drift 2 v/c i io input offset current v out = v cc /2, t min t amb t max 130 na i ib input bias current v out = v cc /2 t min t amb t max 15 55 90 na cmr common mode rejection ratio t min t amb t max 65 60 85 db svr supply voltage rejection ratio v cc = 4.5 to 5.5 v t min t amb t max 75 70 90 db a vd large signal voltage gain r l = 10 k , v out = 2 v p-p 70 200 v/mv r l = 600 , v out = 2 v p-p t min t amb t max 24 3 35 v oh high level output voltage r l = 10 k , t min t amb t max 4.9 v r l = 600 , t min t amb t max 4.85 v ol low level output voltage r l = 10 k , t min t amb t max 50 mv r l = 600 , t min t amb t max 120 i o output short circuit current 50 80 ma i cc supply current (per operator) no load, vout = vcc/2 tmin tamb tmax 0.9 1.2 1.3 ma gbp gain bandwidth product rl = 10 k , cl = 100 pf 4 mhz sr slew rate rl = 10 k , cl = 100 pf 1.3 v/ s m phase margin at unit gain rl = 10 k , cl = 100 pf 63 degrees g m gain margin rl = 10 k , cl = 100 pf 9.5 db e n equivalent input noise voltage f = 1 khz 9 thd total harmonic distortion v out = 2 v p-p , f = 1 khz, a v = 1, r l = 600 0.005 % c s channel separation 120 db nv hz ----------- -
ts9222, ts9224 electrical characteristics doc id 15718 rev 2 5/14 figure 1. total supply current vs. supply voltage figure 2. output short circuit current vs. output voltage 0 0,5 1 1,5 2 2,5 3 -100 -80 -60 -40 -20 0 20 40 60 80 100 output volta g e (v) o utput s hort- c ircuit c urrent ( ma ) source sink vcc=0/3v figure 3. voltage gain and phase vs. frequency, c l = 100 pf figure 4. voltage gain and phase vs. frequency, c l = 500 pf 10 6 10 7 ?4 0 ?4 0 ?3 0 ?3 0 ?2 0 ?2 0 ?1 0 ?1 0 0 0 10 10 20 20 30 30 40 40 ?1 2 0 ?8 0 ?4 0 0 40 80 120 vcc=5v, vicm=2.5v cl=100pf, rl=10kohms, vrl=vcc/2 tamb=25c gain (db) phase () 1e+2 1e+3 1e+4 1e+5 1e+6 1e+7 1e+8 frequency (hz) 0 10 20 30 40 50 gain (db) 0 60 120 180 phase (deg) c l =500pf figure 5. equivalent input noise voltage vs. frequency figure 6. thd + noise vs. frequency, r l = 2 k , vo = 10 vpp 0.01 0.1 1 10 100 frequency (khz) 0 5 10 15 20 25 30 equivalent input noise (nv/sqrt(hz) v cc =1.5v r l =100 0.01 0.1 1 10 100 frequency (khz) 0 0.005 0.01 0.015 0.02 thd+noise (%) r l =2k vo=10vpp v cc =6v av= 1
electrical characteristics ts9222, ts9224 6/14 doc id 15718 rev 2 figure 7. thd + noise vs. frequency, r l = 32 , vo = 4 vpp figure 8. thd + noise vs. frequency, r l = 32 , vo = 2 vpp 0.01 0.1 1 10 100 frequency (khz) 0 0.008 0.016 0.024 0.032 0.04 thd+noise (%) r l =32 vo=4vpp v cc =2.5v av= 1 0.01 0.1 1 10 100 frequency (khz) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 thd+noise (%) r l =32 vo=2vpp v cc =1.5v av= 10 figure 9. thd + noise vs. output voltage, r l = 600 , f = 1 khz figure 10. thd + noise vs. output voltage, r l = 32 , f = 1 khz figure 11. thd + noise vs. output voltage, r l = 2 k , f = 1 khz 0 0,2 0,4 0,6 0,8 1 1,2 0,001 0,010 0,100 1,000 10,000 vou t ( vrms ) thd+noise ( % ) r l =600 f=1khz v cc =0/3v av= -1 0 0.2 0.4 0.6 0.8 1 vout (vrms) 0.01 0.1 1 10 thd+noise (%) r l =32 f=1khz v cc =1.5v av= -1 0 0.2 0.4 0.6 0.8 1 1.2 vout (vrms) 0.001 0.01 0.1 1 10 thd+noise (%) r l =2k f=1khz v cc =1.5v av= -1
ts9222, ts9224 package information doc id 15718 rev 2 7/14 3 package information in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
package information ts9222, ts9224 8/14 doc id 15718 rev 2 3.1 so-8 package information figure 12. so-8 package mechanical drawing table 5. so-8 package mechanical data ref. dimensions millimeters inches min. typ. max. min. typ. max. a1.750.069 a1 0.10 0.25 0.004 0.010 a2 1.25 0.049 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 d 4.80 4.90 5.00 0.189 0.193 0.197 e 5.80 6.00 6.20 0.228 0.236 0.244 e1 3.80 3.90 4.00 0.150 0.154 0.157 e 1.27 0.050 h 0.25 0.50 0.010 0.020 l 0.40 1.27 0.016 0.050 l1 1.04 0.040 k 0 8 1 8 ccc 0.10 0.004
ts9222, ts9224 package information doc id 15718 rev 2 9/14 3.2 tssop8 package information figure 13. tssop8 package mechanical drawing table 6. tssop8 package mechanical data ref. dimensions millimeters inches min. typ. max. min. typ. max. a1.200.047 a1 0.05 0.15 0.002 0.006 a2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 d 2.90 3.00 3.10 0.114 0.118 0.122 e 6.20 6.40 6.60 0.244 0.252 0.260 e1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 0.0256 k0 80 8 l 0.45 0.60 0.75 0.018 0.024 0.030 l1 1 0.039 aaa 0.10 0.004
package information ts9222, ts9224 10/14 doc id 15718 rev 2 3.3 so-14 package information figure 14. so-14 package mechanical drawing table 7. so-14 package mechanical data dimensions ref. millimeters inches min. typ. max. min. typ. max. a 1.35 1.75 0.05 0.068 a1 0.10 0.25 0.004 0.009 a2 1.10 1.65 0.04 0.06 b 0.33 0.51 0.01 0.02 c 0.19 0.25 0.007 0.009 d 8.55 8.75 0.33 0.34 e 3.80 4.0 0.15 0.15 e1.27 0.05 h 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 l 0.40 1.27 0.015 0.05 k 8 (max.) ddd 0.10 0.004
ts9222, ts9224 package information doc id 15718 rev 2 11/14 3.4 tssop14 package information figure 15. tssop14 package mechanical drawing table 8. tssop14 package mechanical data ref. dimensions millimeters inches min. typ. max. min. typ. max. a1.200.047 a1 0.05 0.15 0.002 0.004 0.006 a2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 d 4.90 5.00 5.10 0.193 0.197 0.201 e 6.20 6.40 6.60 0.244 0.252 0.260 e1 4.30 4.40 4.50 0.169 0.173 0.176 e 0.65 0.0256 l 0.45 0.60 0.75 0.018 0.024 0.030 l1 1.00 0.039 k0 80 8 aaa 0.10 0.004
ordering information ts9222, ts9224 12/14 doc id 15718 rev 2 4 ordering information table 9. order codes order code temperature range package packaging marking ts9222id ts9222idt -40 c, +125 c so-8 tube or tape & reel 9222 ts9222ipt tssop8 tape & reel 9222 ts9224id ts9224idt so-14 tube or tape & reel 9224 ts9224ipt tssop14 tape & reel 9224 ts9222iydt (1) 1. qualified and characterized according to aec q100 and q0 03 or equivalent, advanced screening according to aec q001 & q 002 or equivalent. so-8 (automotive grade) tape & reel 9222y ts9222iypt (2) 2. qualification and characterization according to aec q100 and q003 or equivalent, advanced screening according to aec q001 & q 002 or equivalent are on-going. tssop8 (automotive grade) tape & reel 9222y ts9224iydt (1) so-14 (automotive grade) tape & reel 9224y TS9224IYPT (1) tssop14 (automotive grade) tape & reel 9224y
ts9222, ts9224 revision history doc id 15718 rev 2 13/14 5 revision history table 10. document revision history date revision changes 25-sep-2009 1 initial release. 18-mar-2010 2 added pinout of dual and quad versions on cover page. corrected avd parameter values in table 3. and table 4.
ts9222, ts9224 14/14 doc id 15718 rev 2 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of TS9224IYPT

	To Download TS9224IYPT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .